Screw-in tool ASSY Isotop Solar
Insertion tool ASSY Isotope solar
INRTTL-F.SCR-(SOL-ISOTOP)-1/4IN-M8
Register now and access more than 125,000 products
Optimum transmission of forces
Due to positive locking of the screw provided by counter thread in the screw-in tool.
No thread damage
As no punctual load is exerted.
Not suitable for impact screwdrivers!
Datasheets(X)
The position of the screw should be precisely marked in advance, as the screw cannot be released using the screw-in tool.
1 Position
Position the screw and insert it into the tool as far as it will go by turning clockwise.
2 Screw
Screw the ASSY® Isotop Solar in fully.
3 Switch
As soon as the screw has been screwed in completely, switch the cordless drill to anti-clockwise rotation.
4 Remove
Unscrew the screw-in tool.
Suitable for screw thread | M8 |
Adapter type | 1/4 inch |
Last viewed
Reducing sleeve 10/8
Hexagonal bolt with shank DIN 931, A4-70 stainless steel, plain
Plastic protective cover
Plus Longlife & Speed tile chisel
Cutting pliers For plastic pipes up to dia. > 22 mm
Wood clip 5
Wiring duct
Solar stainless steel corrugated pipe
Transport pad
C 6.3 slotted bit (1/4 inch)