Screw extractor
Screw extractor
EXTR-SCR-(M3-M6)
Register now and access more than 125,000 products
Datasheets(X)
Drill a hole into the part being removed as shown in the table and screw in the extractor anti-clockwise. Further tightening unscrews the broken part without damaging the thread.
Suitable for screw | M3 - M6 |
Length | 50 mm |
Drill diameter | 1.8 mm |
Size | 1 |
Material | Chrome-vanadium steel |
Last viewed
Oval-head screws with H cross recess DIN 7985, steel 8.8, zinc-plated, blue passivated (A2K)
Peltor Optime III 3M ear defenders
Turn-lock fastener For 22.5 x 13.5 mm oval eyelets
Rechargeable LED hand-held lamp Ergopower Blade
Wire end ferrule with plastic sleeve
Hand tap, second tap HSS DIN 352
Type 80 staples
Hand tap, taper tap HSS DIN 352
Spray adhesive
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet