Screw extractor
Screw extractor
EXTR-SCR-(M11-M14)
Register now and access more than 125,000 products
Datasheets(X)
Drill a hole into the part being removed as shown in the table and screw in the extractor anti-clockwise. Further tightening unscrews the broken part without damaging the thread.
Suitable for screw | 7/16 inch - 9/16 inch |
Length | 71 mm |
Drill diameter | 6.5 mm |
Size | 4 |
Material | Chrome-vanadium steel |
Last viewed
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Twist drill bit HSCo DIN 1869 R1 type RN
System insert 8.4.1, screwdriver
Wire nail DIN 1151 hot-dip galvanised steel
LED surface-mounted lamp ABL-230-2
Cordless drill driver ABS 18 POWER M-CUBE
Hard hat SH 2000-S
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Suction hose, electrically conductive For ISS and TSS series