Welcome to Würth Canarias For trade customers only

Scaffolding anchor For lightweight metal construction GA

Scaffolding anchor GA
FRMANC-A2-M16X17

Art.-no. 0201516
EAN 4024835189347
Prices for customers after login
Scaffolding anchor For lightweight metal construction GA

Art.-no. 0201516

Prices for customers after login
Quantity
PU
x 50 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For the safe and easy mounting of scaffolding on steel And wooden substructure
  • Can be used universally with façade construction screws up to 6.5 mm in diameter

  • Can also be used in conjunction with self-drilling screws (e.g. Zebra piasta screws)

  • Characteristic load values of the screw used can be found in the corresponding approval

  • Less storage space necessary, as the user can solve all common anchoring problems with just two additional parts

  • Very easy installation and removal

  • Can be reused, as the GA scaffolding anchor does not need to cut a thread in the substructure
Product information

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Instructions

Installation


  • First select the optimum fastening screws for your application and substructure.

Note the height of the GA scaffolding anchor, e.g. 17 mm in this case.


  • Push the sealing washer of the façade construction screw back by approx. 20-25 mm.

  • Install the screw as usual, but only tighten enough for the sealing washer to make contact.

  • Now push the scaffolding anchor between the screw head and the sealing washer and tighten the screw until it is in contact with the scaffolding anchor. Avoid overtightening the screw to prevent damaging the sealing washer. Recommended tightening torque 3-5 Nm.

  • Finally, once you have screwed the eye nut onto the thread of the GA scaffolding anchor, you can suspend the scaffolding in the eye nut.


Removal


  • Unscrew the eye nut from the GA scaffolding anchor. If the thread sticks, you can hold the scaffolding anchor at the hexagon head with an AF 17 wrench until the eye nut is loose.

  • Now unscrew the fastening screw slightly and remove the GA scaffolding anchor.

  • You can now re-tighten or remove the screw as required.

  • The scaffolding anchor can of course be left installed if it will be needed again at a later date.

Material

Stainless steel A2

Surface

Plain

RoHS-compliant

Yes

Thread type x nominal diameter (d1)

M16

Length (l1)

17 mm

Thread length (metric thread) (l2)

10 mm

Height of the nut (m1)

7 mm

External drive (s1)

WS17

Groove width (n1)

6.8 mm

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Ring nut DIN 582, steel C15E, zinc-plated, blue passivated (A2K)

NUT-EYE-FACADECNST-C15E-(A2K)-M16/25

x 25 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information