Satin-finish wheel brush Universal, crimped, with hole
Grinding bristle brush
BRSH-PLA-SATNFINR-100X12X19MM
Register now and access more than 125,000 products
- No or only a small change in the geometry of the workpiece
- The sanding bristles work not only at the tips but also on the sides, thanks to the polyamide fibres interspersed with abrasive grain
- Seamless packing to wide rollers is possible due to the special design
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Deburring, cleaning, smoothing, polishing, structuring and roughing
- Smoothing of wood surfaces
Diameter x width x drill hole (DxBxA) | 100 x 12 x 19 mm |
Max. rotation speed | 8000 rpm |
Material of wire | Polyamide fibres with silicon carbide sanding grains |
Design | Corrugated |
Suitable for satin finisher (point system) | 4 of 4 points |
Aggressiveness | Middle |
EN standard | 1083-2 |
Last viewed
Hexagon head bolt with thread up to head for pressure vessel construction ISO 4017, steel 5.6, zinc-plated, blue passivated (A2K)
2D snap-on coupling and adapter Dynapro slide
Universal cleaner R1
Metal cavity anchor W-MH assortment
Collated nails and gas cartridge NG CS-2/3
Façade construction screw Faba® type A with hexagon head and sealing washer
High-performance gas unit DIGA® CS-3
Drilling stand DS Compact
1/4-inch socket wrench insert, TX head For external TX screws
Circular blade with 90° angle