Sanding paper for varnishes
Sandpaper roll high-performance for varnishes
ABRROLL-F.LAC-P240-115MMX50M
Register now and access more than 125,000 products
Composition
- Backing: semi latex paper.
- Abrasive: corundum.
- Binder: Resin/resin with a second layer of calcium stereate.
General characteristics
- Very abrasive and constant grain with an excellent finish that prevents pockmark formation.
- Smooth and even abrasive surface.
- Optimum finish and low heat generation in the sanded area (anti-calorific effect).
Datasheets(X)
For varnishes, nitrocellulose, polyurethanes, acrylics and polyester.
For flat surfaces, curved surfaces and hard-to-reach areas.
Use by hand and machine.
Storage
Store in a dry place at +18°C to +22°C with a relative humidity between 45 % and 65 %.
Protect from direct sun exposure.
Do not place abrasive on the floor.
Width x length | 115 mm x 50 m |
Grid size | 240 |
Last viewed
Rechargeable LED Head lamp Ergopower Sensor
1/4-inch and metric ratcheting double box-end wrench For hexagon drive
Storage box (empty)
Aluminium lashing plate
Connector DIN 7428 C 6.3 (1/4 inch)
Bond + Seal structural adhesive
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain
Brass anchor
Universal tensioning strap
1/2" socket wrench insert Triple square, short