Safety long-life brush Steel, joined to shank
Safety wheel brush with shank
WHLBRSH-SHNK-SAV
Register now and access more than 125,000 products
- No premature breaking of wires
- The bristle width remains consistent during machining thanks to the wheel brush with wire held in a plastic ferrule
- For use on die grinders and drills
- Enhanced safety by preventing premature wire breakage
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, corrosion etc.
- Cleaning welding seams
- For roughening rubber
 | |
Diameter x usable width x shaft diameter (DxAxS) | 60 x 8 x 6 mm |
Wire diameter | 0.30 mm |
Material of wire | Steel |
Surface | Brass plated |
Design | Corrugated, bound in plastic |
Max. rotation speed | 10000 rpm |
EN standard | 1083-2 |
Last viewed
Spring spiral fixing tool, universal The new spring coil fixing tool fixes the spring directly to the clamping jaw, thereby preventing the spring unscrewing during the clamping process
1/2 inch socket wrench insert metric, hexagon, short
Wheel hub grinder type A
Lube-Shuttle® hand-lever grease gun
Universal holder E 6.3 (1/4") With quick-change chuck and permanent magnet
Hexagonal bolt with shank
1-ear clamp with insert ring
Adapter A4 With centre drill bit
Brake cleaner Plus
Strip For Circo unprinted number plate holder