SML connector
CON-SML-DN150
Art.-no. 0544001150
EAN 4038898875888
Register now and access more than 125,000 products
- Quick and safe connection with only one threaded plug.
- Simple mounting of connector due to pre-assembled slip-proof EPDM sealing insert.
- Close the connector with a single hexagon socket size AF 6/AF 8.
- No torque wrench or special tool required.
- Easy to pre-assemble pipes and fittings due to the strong clamping effect.
- No torque wrench required. The connector is tightened until the slot is closed.
The connector should only be tightened until the slot is closed.
Datasheets(X)
For building drainage
 | |
DN nominal width (∅D) | DN 150 |
Width across flats | 6 mm |
Material of sealing ring | Ethylene propylene diene terpolymer rubber EPDM |
Material of sheet-metal ring covering | Chrome steel |
Material of fastener | Steel |
Operating pressure | 0.5 bar |
Internal drive | HS6 |
Min. temperature resistance | -10 °C |
Max. temperature resistance | 95 °C |
Height (H) | 187 mm |
Width (BM) | 55 mm |
Thread type | Metric thread |
Resistance against | Aging, Ozone, Weather |
Outer diameter | 172 mm |
Nominal diameter | 8 mm |
Last viewed
Threaded rod DIN 976-1 (type A) with standard metric ISO thread, A4 stainless steel
Hexagon nut, low profile with fine thread DIN 439, A2 stainless steel, plain
Round head screw with square neck DIN 603, A2 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagon bolt with shank DIN 931, A4-70 stainless steel, plain
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Flat gasket