SH perforated sleeve for injection systems

Name: SH perforated sleeve for injection systems
Brand: Würth
SKU: 090344 164

Perforated sleeve SH
ANC-(SH)-PLA-TRANSP-16X85

Art.-no. 090344 164

EAN 4050641991829

All versions

Specification

Masonry, individual fixing point

Individual fixing point in masonry

ALLROUNDER WIT-VM 250 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve

WIT-NORDIC injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve

BASIC WIT-PM 200 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve

Notice

Do not use perforated sleeve SH in aerated concrete!

European Technical Assessment ETA-16/0757 and ETA-20/0854: Individual fixing point + masonry in solid and perforated brick (perforated sleeve SH, ALLROUNDER WIT-VM 250 or WIT-NORDIC, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1)

European Technical Assessment ETA-13/0037: Individual fixing point + masonry in solid and perforated brick (perforated sleeve SH, BASIC WIT-PM 200, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1)

Application area

For anchoring in solid and perforated brick masonry


Type description	SH 16 x 85
Diameter	16 mm
Length	85 mm
Material	Plastic
Nominal drill-bit diameter (d 0)	16 mm
Drill hole depth (h 0)	90 mm
Effective anchoring depth (h ef)	85 mm
Suitable for anchor rod	M8, M10
Suitable for female thread sleeve	FT M6
Required injection mortar	WIT-PM 200, WIT-VM 250, WIT-NORDIC
Approval	ETA-13/0037, ETA-16/0757, ETA-20/0854