S4000 plug-in nipple With male thread
Nipple with male thread, series 4000
NPL-PN-S4000-ET-G1/2IN
Register now and access more than 125,000 products
High flow rate of up to 3900 l/min and a maximum operating pressure of 16 bar
Allows optimal power delivery for compressed air consumers
Hardened steel nipples
For max. load-bearing capacity and long service life
Airtight connections
Low energy use and high efficiency
Exposed surfaces are chromium-plated, nickel-plated or galvanised.
High corrosion resistance – protected even under demanding conditions
Series 4000 fittings comply with the European Standard 10.4.
Compatibility with other compressed air fittings
Datasheets(X)
Material | Steel |
Connection thread | ET G 1/2 inch |
Length (L) | 42 mm |
Surface | Zinc plated |
Width across flats (SW) | 24 mm |
Max. pressure | 16 bar |
Flow capacity | 3900 l/min |
Last viewed
Tri-wing bit E 6.3 (1/4")
3/8 inch socket wrench insert metric, hexagon, short
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Spring toggle type W-FK with washer and brass knurled nut, zinc-plated steel
Pin terminal conn MATE-N-LOK (M-N-L) 2.1 Uninsulated
Needle and nozzle kit ESENCIAL W21
Quick-mount NPH screw
HSS SMART STEP combination tap bit
1/2" socket wrench insert For TX screws, short
Felt segmented polishing disc For angle grinders with M14 direct mount