Rust Stop Quattro primer

Name: Rust Stop Quattro primer
Brand: Würth
SKU: 08932141

Primer Rust-Stop Quattro
PRIM-(ROSTSTOP QUATTRO)-400ML

Art.-no. 08932141

EAN 4045989911172

All versions

Similar products

Prices for customers after login

Rust Stop Quattro primer

Art.-no. 08932141

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Fast-drying universal primer with a broad range of applications

Unique combination of primer, adhesion promoter, corrosion protection and welding primer in a single product

Primer reliably prevents further rusting with anti-oxidation formula.

Adhesion agent

Good application surface structure for further painting work

Suitable for use in conjunction with PU and MS polymer sealing compounds

Corrosion protection

Excellent, long-term protection against oxidation

Outstanding resistance to spray water and salt water

Welding substrate, full penetration welding possible wet and dry

Very high temperature resistance up to 300°C, briefly up to 500°C

VOC-compliant

Lower solvent content

Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)

Notice

After use, turn the can upside down and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Freight forwarding companies, transport companies, commercial vehicle repair workshops, vehicle construction, building trade, concrete mixing plants, agriculture, forestry, local authorities etc.

Instructions

The substrate must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake can well before use. Apply a thin coat for the first spray coating. Observe the flash-off time. Can be painted after approx. 20 minutes with all commercially available 1-component, 2-component and water-based top-coat paint systems.

Contents	400 ml
Chemical basis	Polyvinyl butyral
Colour	Silver grey
Max. processing temperature	40 °C
Density	0.75 g/cm³
Max. temperature resistance	300 °C
Max. short-term temperature resistance	500 °C
VOC concentration (CH)	669 g/l
Min. processing temperature	5 °C
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.