Round head screw with square neck DIN 603, A4 stainless steel
DIN 603 A4/70 stainless steel plain
SCR-MHD-DIN603-A4/70-M8X100
Register now and access more than 125,000 products
The flat square neck fixes the round head screw e.g. in a slot and allows tightening from the nut side without counter-tensioning.
Datasheets(X)
CAD data (available after login)
Use in wood construction, especially carpenter's workshops, pre-fabricated house construction, vehicle construction (e.g. truck load platforms), boat building, trade fair construction, scaffolding construction, for heavy, demountable transport racks or machine crates and transport crates for sea transport. Used to join wooden parts or wood and metal parts. The square neck is sunk into the wood. Hole diameter is dependent on thread dimension. For joining wood to wood, a larger washer must be placed under the nut, e.g. a wood construction washer.
 | |
Thread type x nominal diameter (d1) | M8 |
Length (l1) | 100 mm |
Material | Stainless steel A4 |
Property class | 70 |
Surface | Plain |
Head diameter (dk) | 20.65 mm |
Head height (k1) | 4.88 mm |
Square width (V) | 8.58 mm |
Square height (f) | 5.6 mm |
Internal drive | 0 - not applicable |
Standards | DIN 603 |
RoHS-compliant | Yes |
Design | 0 - not applicable |
Head type | Cup head square neck |
Head details | With square neck |
Drive type | 0 - not applicable |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Shank diameter | 8 mm |
Thread length (metric thread) (b) | 22 mm |
Product class | C |
Area of application | 0 - not applicable |
Regulated area | 0 - not applicable |
Last viewed
HSS annular cutter
Roofing screw with hexagon head and drill tip
Empty case for MH 11-XE demolition hammer
HSS annular cutter
Wide-jet nozzle
Needle and nozzle kit ESENCIAL W21
Rechargeable battery For Würth power tools Li-ion 12 volt
HSS annular cutter
Soldering reflector nozzle
Hammer drill H 28-MLS POWER