Round-head nail NK 700 With steel washer
Round-headed nail NK 700
NL-RDHD-NK700-DISC12MM-54MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Datasheets(X)
Universal nail for steel substructures and concrete substrates (standard concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Shaft length (SL) | 54 mm |
Shank diameter (ds) | 3.7 mm |
Washer diameter (ØS) | 12 mm |
Head diameter (dk) | 5.6 mm |
Suitable for device type | Hilti DX 450, Hilti DX5 |
Last viewed
Fuse holder For flat blade fuses ATO
Securing clip for Redoslide HW/HNW sliding door fitting set and wood front panel
Hammer drill bit Max Quadro-L Vario
Snap ring shape SW for shaft
System insert 8.4.1, socket wrench 1/4 + 1/2 inch
Tubular rivet shape A
Plumber's sealing screw, colour
Smartboard Tavinea Optima For Vionaro/Nova Pro Scala
Flat cover cap, for hexalobular socket and AW drive
Standard cable tie with plastic latch