Round-head nail NK 700 With steel washer
Round-headed nail NK 700
NL-RDHD-NK700-DISC12MM-42MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Datasheets(X)
Universal nail for steel substructures and concrete substrates (standard concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Shaft length (SL) | 42 mm |
Shank diameter (ds) | 3.7 mm |
Washer diameter (ØS) | 12 mm |
Head diameter (dk) | 5.6 mm |
Suitable for device type | Hilti DX 450 |
Last viewed
PTFE core, aluminium torch set
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Metric combination wrench with POWERDRIV®
Bonded seal
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Fast grinding polish P10 Plus
System insert 8.4.1, screwdriver
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Combination wrench, inch with POWERDRIV®