Round-head nail NK 700 With steel washer
Round-headed nail NK 700
NL-RDHD-NK700-DISC12MM-27MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Universal nail for steel substructures and concrete substrates (standard concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Shaft length (SL) | 27 mm |
Shank diameter (ds) | 3.7 mm |
Washer diameter (ØS) | 12 mm |
Head diameter (dk) | 5.6 mm |
Suitable for device type | Hilti DX 450, Hilti DX5 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Cable tie KBL 2 made of polyamide with plastic tongue, black
Cable clamp insert clip High pull-out forces
TIME-SERT® screw-in tool
Holder For small abrasives
Sleeve for rigid PVC pipe 4321
Electrician's visor SLB 1 For electrician's helmet SH-E 2000-S
Holder For 12 mm, 20 mm and 30 mm countersinks
Holder For small abrasives
WELDING BOOT S3 VULCANO 2.0
Lock washer DIN 127, steel, mechanically applied zinc coating
