Rivet nut with small countersunk head and knurled shank
Small countersunk head sst A2 knurled shank open
NUT-RIV-CS-A2-(0,8-3,5)-19,5X12,9-M10
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M10 |
Length (l1) | 19.5 mm |
Head diameter (d1) | 14.5 mm |
Outer diameter (d2) | 12.9 mm |
Head height (k1) | 1.1 mm |
Min./max. grip range (s1) | 0.8-3.5 mm |
Shear-fracture load | 5880 N |
Max. tightening torque | 32 Nm |
Drill hole diameter | 13 mm |
Shank detail | With knurled shank |
Head type | Small countersunk head |
Last viewed
Metric combination wrench with POWERDRIV®
3/8-inch socket wrench insert, metric long
Stirrup handle
Double-end box wrench, deep depressed centre 8 pieces
High Power battery
Nozzle and needle kit ADVANCE W18
Hose set For TOP Gun cleaning and washing appliances
HSS annular cutter
Professional wallpaper scissors
Lock washer with right-angle cross-section, shape B DIN 127, A4 stainless steel, plain