Rivet nut with small countersunk head and knurled shank
Small countersunk head sst A2 knurled shank open
NUT-RIV-CS-A2-(0,5-3,0)-11,5X6,9-M5
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M5 |
Length (l1) | 11.5 mm |
Head diameter (d1) | 8 mm |
Outer diameter (d2) | 6.9 mm |
Head height (k1) | 0.9 mm |
Min./max. grip range (s1) | 0.5-3 mm |
Tensile fracture load | 11760 N |
Shear-fracture load | 4030 N |
Max. tightening torque | 10.5 Nm |
Drill hole diameter | 7 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
Folding trolley with drawbar
Hammer drill bit Plus Duo-S Vario
Tool head, small design For crimping pliers
HSS-short stepped drill bit
Shovel with tip and wooden shaft
30 % diluted, inorganic radiator anti-freeze BIKELINE
Zinc clip-on wheel weight For car steel rims
Hand tap, second tap HSS DIN 352
Mercurium impregnation
Wiring duct