Rivet nut with countersunk head and knurled shank
Countersunk head aluminium knurled shank open
NUT-RIV-CS-ALU-(4,0-6,5)-10,9X21,0-M8
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
 | |
Matière | Aluminium |
Finition | Plain |
Conforme à la norme RoHS | Yes |
Thread type x nominal diameter (D) | M8 |
Longueur (l1) | 21 mm |
Head diameter (d1) | 13.5 mm |
Outer diameter (d2) | 10.9 mm |
Hauteur de tête (k1) | 1.5 mm |
Plage d'ouverture min./max. (s1) | 4.0-6.5 mm |
Tensile fracture load | 14700 N |
Shear-fracture load | 2400 N |
Max. tightening torque | 14.6 Nm |
Drill hole diameter | 11.0 mm |
Shank detail | With knurled shank |
Forme de tête | Countersunk head |
Datasheets(X)
CAD data (available after login)
Last viewed
3/8-inch socket wrench insert, metric long
Lock for polypropylene service cases
Vehicle connector bus bar 6.3 x 0.8 Uninsulated
Ratchet magazine screwdriver Vehicle/metal
Plastic protective cover
1/2 inch socket wrench insert metric, hexagon, short
1/4 inch extension
Wheel hub grinder type A
1/2 inch and 1/4 inch socket wrenches Assortment of 56 pieces
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
