Rivet nut with countersunk head and knurled shank
Countersunk head aluminium knurled shank open
NUT-RIV-CS-ALU-(1,5-4,0)-6,9X13,5-M5
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M5 |
Length (l1) | 13.5 mm |
Head diameter (d1) | 9.5 mm |
Outer diameter (d2) | 6.9 mm |
Head height (k1) | 1.5 mm |
Min./max. grip range (s1) | 1.5-4.0 mm |
Tensile fracture load | 4900 N |
Shear-fracture load | 1170 N |
Max. tightening torque | 5 Nm |
Drill hole diameter | 7.0 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
Rivet nut with countersunk head and knurled shank
Rivet nut with countersunk head and knurled shank
Useit® Superpad wood sanding disc
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Nozzle and needle kit ADVANCE W18
Easylock grease coupling
RW Edition multitool with leather pouch and Reinhold Würth signature
3M Cubitron II flap disc
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
Strip For Circo unprinted number plate holder