Ring-shaped crimp cable lug DIN 46234 and similar
Crimp cable lug
CRMPCBLUG-46234-CU-(J2N)-M10-150,0SMM
Register now and access more than 125,000 products
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
CAD data (available after login)
For multi-wire, fine-wire and very fine wire copper conductors, such as compliant with DIN EN 60228 Class 2, 5 and 6
 | |
Wire cross section | 150 mm² |
Flange hole | M10 |
Nominal size | 10 - 150 |
Wire diameter (d1) | 19.0 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (l) | 50 mm |
Sleeve length | 24 mm |
Width (b) | 30 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Wire stripping pliers, adjustable
3/8 inch cardan joint
Flat connector contact MINI MIC SRS 1.5
Rechargeable battery For Würth power tools Li-ion 12 volt
Multi-socket wrench 1/4 inch Assortment of 23 pieces
Ratchet for 10 mm bits
Guide drill bit A014D For adapter A4
SAFETY SHOES
Innovative and comfortable safety shoes. Due to the insulating sole, the shoes are recommended for electricians working in dry environments.
Quick-release service coupling
Half-shell trapezoidal crimping insert