Ridge and hip roll WÜTOP® roll ridge With butyl adhesive strips
WÜTOP ridge and arris roll, Rollfirst
RIDGROLL-BROWN-295MMX20M
Register now and access more than 125,000 products
- WÜTOP® roll ridge can be installed quickly and easily
- It offers absolute UV protection and is not affected by ozone and other environmental influences
- The WÜTOP roll ridge adhesive system is activated by removing the cover film
- Shaped for optimum adaptability
- Ensures optimum ventilation according to DIN 4108
- With a ventilation cross-section of approx. 210 cm²/lfm
Datasheets(X)
Universal system for almost all concrete and clay roof tiles
- The substrate must be clean, dry and free from grease and dust.
- WÜTOP roll ridge is tacked to the start of the ridge rafter in the middle
- Remove 50–70 cm of masking paper from the adhesive.
- Simultaneously press the adhesive on both sides firmly onto the top row of tiles and smooth down into the trough. Tack every 1–2 m if necessary.
- WÜTOP roll ridge can be cut using standard scissors.
Couleur | Dark brown |
Longueur de rouleau | 10 m |
Roll width | 295 mm |
Number of rolls | 2 STK |
Ventilation cross section | 210 cm² |
Température de mise en œuvre min. | 5 °C |
Résistance aux UV | Yes |
Résistance thermique min. | -40 °C |
Résistance thermique max. | 90 °C |
Longueur | 20 m |
Last viewed
WMC 95 dry tile cutters
Hexagon head bolt
1/2" socket wrench insert metric, bi-hex, short
Metric combination wrench with POWERDRIV®
Aligning clamp for window frames
Masonry connectors/flat tie rod Stainless steel, material no. 1.4401, 1.4571, 1.4362 in line with DIN 17440
Spring lock washer, shape A DIN 137, spring steel, mechanically applied zinc coating, shape A, curved
Dust extraction For socket cutters without quick-change function
Insulation holder W-DH
Neutral silicone A8 PRO