Reinforcement mesh GEOLASH
Reinforcement mesh GEOLASH
REINFMSH-SRFCOAT-GEOLASH-100MX17CM
Register now and access more than 125,000 products
- Punched and heat-welded geotextile for reinforcement in awkward areas.
- Ideal for angles, active cracks, isolation joints, half-rounds, edges and edge protection etc.
- Reinforcement of waterproofing membranes.
- For irregular surfaces, Geolash is impregnated between layers of PU membrane.
- 100 % solvent-compatible.
Datasheets(X)
Trim the required amount of Geolash for the area to be treated and place on the first layer of fresh PU membrane.
Ensure good adhesion using a non-impregnated roller.
Then apply a second coat of PU membrane after the first coat has dried. Check that the Geolash is fully adhered.
Product weight (per item) | 1050.000 g |
| Technical data | |
| Weight | 50 g/m² |
| Thickness | 0.43 mm |
| Longitudinal elasticity | 20 % |
| Transversal elasticity | 20 % |
Last viewed
Electric orbital sander ESS 115-2 With universal clamping system
Plaster microspheres
Air spiral line, universal
Cut-resistant/chainsaw jacket
Sheet metal nut Shortened rear claw
TX screwdriver with borehole
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
PKD-S diamond socket cutter
Stone drill bit DZ 1
Wheel hub grinder type A