Reinforcement mesh GEOLASH
Reinforcement mesh GEOLASH
REINFMSH-F.SRFCOAT-GEOLASH-100MX1M
Register now and access more than 125,000 products
- Punched and heat-welded geotextile for reinforcement in awkward areas.
- Ideal for angles, active cracks, isolation joints, half-rounds, edges and edge protection etc.
- Reinforcement of waterproofing membranes.
- For irregular surfaces, Geolash is impregnated between layers of PU membrane.
- 100 % solvent-compatible.
Trim the required amount of Geolash for the area to be treated and place on the first layer of fresh PU membrane.
Ensure good adhesion using a non-impregnated roller.
Then apply a second coat of PU membrane after the first coat has dried. Check that the Geolash is fully adhered.
Product weight (per item) | 5250.000 g |
| Technical data | |
| Weight | 50 g/m² |
| Thickness | 0.43 mm |
| Longitudinal elasticity | 20 % |
| Transversal elasticity | 20 % |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Machinists' hammer with protective handle sheath
1/2 inch socket wrench insert metric, hexagon, short
Hand tap, taper tap HSS DIN 352
Twist drill bit HSCo DIN 1897 type RN MAGMA
Quick-mount NPH screw
SH-64 invisible cabinet hanger
Rechargeable battery For Würth power tools Li-ion 12 volt
Hammer drill bit cassette with SDS and Duo-S Vario drive arbor Seven pieces
Oxym silicone sealant for windows
Support plate
