Reinforcement mesh EPDM
Reinforcement mesh EDPM
REINFMSH-F.SRFCOAT-EPDM-0,15X0,35M
Register now and access more than 125,000 products
- Mesh with high tensile strength.
- Ideal for expansion joints. Offers high longitudinal strength (500 N/5 cm) and transverse strength (50 N/5 cm).
- Wide range of applications
- Ideal for angles, active cracks, isolation joints, half-rounds, edges and edge protection etc.
- 100 % solvent-compatible.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Trim the required amount of EPDM reinforcement mesh for the area to be treated and place on the first layer of fresh PU membrane.
Ensure good adhesion using a non-impregnated roller.
Then apply a second coat of PU membrane after the first coat has dried and after checking that the EPDM reinforcement mesh is fully adhered.
Product weight (per item) | 9375.000 g |
| Technical data | |
| Weight | 250 g/m² |
| Thickness | 0.35 mm |
| Longitudinal elasticity | 20 % |
| Transversal elasticity | 100 % |
| Permeability to water vapour | 7.90 Sd |
| Burst pressure | 2 bar/cm² |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Wheel hub grinder type A
Halogen-free threaded connector LH IP67
Allen key, hexagon socket with ball head Extra-long design
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
Polo Shirt DRY TECH
SAFETY SHOES
Innovative and comfortable safety shoes. Due to the insulating sole, the shoes are recommended for electricians working in dry environments.
Bike chain spray
1/4-inch socket wrench insert For TX screws
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Metric double open-end wrench DIN 3110/ISO 1085