Ratchet with twist handle 1/2''
1/2-inch ratchet with turning handle
RTCH-1/2IN-TURNHNDL-D40MM-L295MM
Register now and access more than 125,000 products
Reversible ratchet with straight square drive
- No reversibility mechanism for operation on the ratchet head
Can be used as a traditional ratchet
Indicates the direction of screwing on each side of the ratchet head
Chrome finish with ergonomic handle
Datasheets(X)
Tip size | 1/2 inch |
Material | Steel |
Material of handle | 2-component plastic |
Surface | Chrome plated |
Length (L1) | 295 mm |
Length of lever (L2) | 155 mm |
Handle length (L3) | 140 mm |
Handle diameter (D1) | 40 mm |
Ratchet diameter (D2) | 42.5 mm |
Ratchet head height (B1) | 22 mm |
Ratchet head height with square (B2) | 38.5 mm |
Last viewed
Hammer-resistant lightweight core bit
Refuse bag Without pull tie
Cavity wall device box
Screwdriver and extractor With car/truck insert and construction machine insert
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Mounting rail in accordance with EN 60715
Gypsum plasterboard anchor W-GS type K with reinforced centring point
Plasterboard dowel
Coloured compartments for insect protection
1/4 inch socket wrench insert, metric short