Raised countersunk tapping screw, F shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape F, H cross recess
DIN 7983 steel zinc plated H shape F
SCR-RSDCS-DIN7983-F-H1-(A2K)-2,9X13
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
- Shape C = with tip
- Shape F = no tip
- Shape R = rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated |
Form | F |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H1 |
Nominal diameter (d1) | 2.9 mm |
Head diameter (dk) | 5.5 mm |
Length (l1) | 13 mm |
Head height (k1) | 1.7 mm |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Declaration of performance (EU-CPR) | No |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Hollow profile fastener BoxBolt® DIN EN ISO 898-1, hot-dip galvanised steel 8.8
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Corrosion protection spray
Hooks, bed fittings
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Charging cable for CLL 18, CLLG 18 and PLL 18
Plumbers'/metalworkers' flat nose pliers
Multi-diameter hole saw
Hand anvil Toe-shaped