RED PERFECT® 3D mini non-woven disc
Mini non-woven disc RED PERFECT 3D
SNDDISC-NYLFLC-FEIN-D76MM
RED PERFECT
Art.-no.
0585707528
EAN 4099618448997
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For matting, satin finishing and finishing (final sanding) and for matching pre-ground, flat and slightly profiled components made of high-grade steel with high requirements for decorative surfaces
- Perfect final sanding suitable for high surface requirements with significantly lower roughness depth, without producing a high-gloss finish
- Very long service life and even distribution of the abrasive grain ensure a consistent grinding finish on the workpiece
- Extra-reinforced nylon non-woven abrasive with three-dimensional non-woven structure for a more compact and abrasive design, resulting in a considerably higher edge strength
- The flexible and elasticated structure of the non-woven fabric ensures optimal adaptation to the workpiece
- No change to the geometry of the workpiece
- For use on pneumatic die grinders with angled, flexible shafts
- 75 mm discs can also be used on 115 mm pneumatic or electric angle grinders in conjunction with an M14 holder
Notice
- At high rotation speeds, a coarse grain acts like a finer grain, and at low rotation speeds, a fine grain acts like a coarser grain
- Use tools with a low contact pressure; high contact pressure leads to premature wear
- If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grit
- Enhanced process reliability: Whether you are working with an electric sanding file, tube belt sander, stationary contact grinding machine or angle grinder, a consistent surface quality is ensured
Product information
Datasheets(X)
Application area
- For finishing, matting, satin finishing and blending with very low roughness depth
- No sanding through when machining body parts
- For removing discolouration, paint layers, surface rust, dirt and oxide layers, restoring slightly damaged surfaces and fine mattings and for deburring
- For removing sanding grooves, scratches, coatings and old paint
- For cleaning surfaces
- Materials to be processed: steel, high-grade steel, aluminium, brass, copper, wood and plastics
Diameter (Ø) | 76 mm |
Colour | Blue |
Design | Compatible with 3M Roloc system |
Grid size | 280 / fine |
Max. rotation speed | 20000 1/min |
Min. recommended rotation speed | 5000 1/min |
Max. recommended rotation speed | 12000 1/min |
Last viewed
C 6.3 PH bit (1/4 inch)
Diamond tile wet core bit With 1/4 inch hexagon bit mount
OBX 20-9277/120 hinge plate
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
CERALINE Longlife & Speed lamella flap disc
Universal grease HHS 2000 ST
Hose clamp with asymmetrical lock
3/8 inch glow plug socket wrench set
Wood screw Hexagon head DIN 571, A2 stainless steel
Dosing pump for 5 l canister