Quick-mount NPH screw
Number plate holder screw with pressed-on washer
SCR-F.NPH-ZDVS-4,8X25MM
Register now and access more than 125,000 products
Head with pressed-on washer
Large contact surface
Galvanised thick-film passivation with seal
400 h salt spray test, meets automotive industry requirements, high corrosion protection
Teeth under head
High stripping torque
Datasheets(X)
Specially adapted thread for screwing plastic parts. Ideal for fixing plastic bumpers
Length | 25 mm |
Head diameter | 8 mm |
Material | Steel |
Nominal diameter | 4.8 mm |
Collar diameter | 10 mm |
Internal drive | H2 |
Surface | Zinc plated thick-layer passivation |
Thread type | Plastic screw thread |
Head type | Button head |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Last viewed
Glow plug shaft cleaning set 6 pieces
O-ring, imperial NBR 70
Reducing nipple
Fixing clamp
Hand tap, second tap HSS DIN 352
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Cutting wheel For pipe cutter
Standard cable tie with plastic latch
1/4 inch socket wrench insert, metric short
1/2 inch socket wrench insert metric, hexagon, short