Protex finish
Aqueous outdoor wood finish, Protex finish
WOPROT-FINISHINGLACK-TRANSPARENT-5LTR
Register now and access more than 125,000 products
Advantages
- For better coverage and finish on the "PROTEX BASE"
- Open-pore product: does not crack and facilitates subsequent maintenance
- Exceptional performance when faced with atmospheric agents: water, sun, cold, etc.
- Excellent weather resistance in marine and high-altitude environments
Characteristics
- Aqueous-based monocomponent
- Easy brush application
- Excellent adhesion
- Excellent elasticity
- Silky, natural look
- Great thixotropy
- Good levelling
- Good coverage
- Quick-drying
- Exceptional performance when faced with atmospheric and biological agents
- Water-repellent
- Great colour stability (with UV filter)
- Gun application (manual, airless, airmix or robot)
- Non-aggressive odour during application
- Open pore
- Drying time refers to air circulation and relative humidity conditions that favour gradual water evaporation
- In the event of rain or high humidity, you may see a white film appear, which will gradually disappear as the water evaporates
- For professional use only
Datasheets(X)
- Shake before use to mix the product well
- Gently sand down and apply one or two coats of product
- Add water to lower the viscosity of the product
- Do not apply the product at temperatures below 12ºC and humidity exceeding 85%, nor on wood with more than 15% relative moisture
- Tool: Hand gun, robot, electrostatic, airless, airmix
- Solvent: water
- Weight %: 5–10%
Contents | 5 l |
Colour | Colourless |
Container | Canister |
Conditions for drying time | at 20°C and 60% relative humidity |
Drying time | 2 h |
Shelf life from production | 12 Month |
Min. processing temperature | 12 °C |
Shelf life from production/conditions | 12 Month / at 5°C to 35°C |
Last viewed
Counter nut, brass Metric according to EN 60423
Universal grease HHS 2000 ST
Rust remover Rost-Off
1/4-inch socket wrench insert For TX screws
Locking hook
Screw caps GPN 800 for metric thread
Spring for DC steel wheel For safety spoke weights made from zinc
Multi-line laser MLPG 22
Euro screw, countersunk head, type A
Fabric sanding belt Zirconia alumina electric grinding file