Protex aqueous-based base
WOPROT-PROTEX-WALNUT-5LTR
Art.-no. 0893800263
EAN 4056807036939
Register now and access more than 125,000 products
Datasheets(X)
- Apply the material on clean, dry surfaces that are resistant to grease, wax, oil or any other product that may prevent proper adhesion.
- Shake before use to mix the product well.
- Perfectly sand down raw wood for good penetration and adhesion.
- Apply using brush, roller or gun. For immersion, adjust viscosity.
- Add water to lower the viscosity of the product.
- Do not apply the product at temperatures below 12ºC and humidity exceeding 85%, or on wood with more than 15% moisture.
- Colour intensity depends on the type of wood and the number of coats applied.
- Tool: Hand gun, robot, electrostatic, airless, airmix
- Solvent: water
- Weight %: 5–10%
Contents | 5 l |
Colour | Walnut |
Chemical basis | Latex/water |
Min./max. application quantity in volume/area | 0.16-0.35 l/m² |
Container | Canister |
Conditions for drying time | at 20°C and 60% relative humidity |
Drying time | 2 h |
Shelf life from production | 12 Month |
Min. processing temperature | 12 °C |
Shelf life from production/conditions | 12 Month / at 5°C to 35°C |
Last viewed
Electrician's helmet SH-E 2000-S
Hexagon head sealing plug, short screw-in pin DIN 7604, steel, plain
Malleable iron screw clamp with protective caps
Blind rivet, flat head
1/2" socket wrench insert, inch short
Recycling collection stand
Flat-head screw with H cross recess ISO 7045, steel 4.8, zinc-plated, blue passivated (A2K)
Swivel bar for furniture locks
Hexagonal bolt with shank ISO 4014, plain A2-50 and A2-70 stainless steel
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®