Protex aqueous-based base
Aqueous outdoor wood protector, Protex base
WOPROT-PROTEX-OAK-5LTR
Register now and access more than 125,000 products
Advantages
- Exceptional performance when faced with atmospheric agents: water, sun, cold, etc.
- With special dispersion that enables wood to transpire correctly and enables elasticity so that it can adapt to natural movements.
- Exceptionally weather resistant with fungicide, bactericide and insecticide protection.
Characteristics
- Aqueous-based monocomponent.
- Easy brush application.
- Excellent adhesion.
- Great thixotropy.
- Good levelling.
- Great coverage.
- Quick-drying.
- Exceptional performance when faced with atmospheric and biological agents.
- Water-repellent.
- Gun application (manual, airless, airmix or robot).
- Non-aggressive odour during application.
- Open pore.
- Colours may transfer.
- Drying time refers to air circulation and relative humidity conditions that favour gradual water evaporation.
- In the event of rain or high humidity, you may see a white film appear, which will gradually disappear as the water evaporates.
- For professional use only.
- Apply the material on clean, dry surfaces that are resistant to grease, wax, oil or any other product that may prevent proper adhesion.
- Shake before use to mix the product well.
- Perfectly sand down raw wood for good penetration and adhesion.
- Apply using brush, roller or gun. For immersion, adjust viscosity.
- Add water to lower the viscosity of the product.
- Do not apply the product at temperatures below 12ºC and humidity exceeding 85%, or on wood with more than 15% moisture.
- Colour intensity depends on the type of wood and the number of coats applied.
- Tool: Hand gun, robot, electrostatic, airless, airmix
- Solvent: water
- Weight %: 5–10%
Inhalt | 5 l |
Farbe | French oak |
Chemische Basis | Latex/water |
Min./max. application quantity in volume/area | 0.16-0.35 l/m² |
Gebinde | Canister |
Trockenzeit Bedingung | at 20°C and 60% relative humidity |
Trockenzeit | 2 h |
Lagerfähigkeit ab Herstellung | 12 Month |
Verarbeitungstemperatur min. | 12 °C |
Lagerfähigkeit ab Herstellung / Bedingung | 12 Month / at 5°C to 35°C |
Datasheets(X)
Last viewed
Toggle anchor W-KD with washer and hexagon nut, zinc-plated steel
1/4 inch extension
3/4-inch impact socket wrench insert hexagon, metric, short
Sheet metal nut, open screw-in area
Ratchet strap For airline profile
1/2 inch and 1/4 inch socket wrenches Assortment of 56 pieces
Cartridge Adjustable for wire stripping pliers
1/4" socket wrench insert metric, long
Shoe TITAN S3
1-ear clamp with insert ring
