Professional submersible pump WP-75
Male connector for prof. submersible pump WP 75
MALCON-F.SUBMPMP-WP75
Art.-no.
0701900752
EAN 4045727985113
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Submersible pump for bilge and disposal of dirty water
- Drainage with IP 68 vortex impeller with thermal protector.
- The bodies of the pump, motor and impeller are cast iron. The shaft with the rotor is made of stainless steel.
- Capable of sucking up solids of max. 30 mm in diameter.
- Professional, highly flexible, lightweight hose available. Highly pressure- and abrasion-resistant, and significantly heat- and fire-resistant.
- Six months' warranty covering manufacturing faults, defective parts, labour and shipping costs.
Notice
Cannot be used move liquids used for food. Not suitable for pumping flammable and/or explosive liquids.
| Technical data | ||
| Voltage | 230 V/50 Hz | |
| Power input | 900 W | |
| Power output | 550 W | |
| Output diameter | 2 inches | |
| Min. working depth | 100 mm | |
| Max. working depth | 10 m | |
| Maximum aspirated flow | 50-30 L/min. | 3000-18,000 L/h |
| Working height | 3-8.5 m | 0.3-0.85 bar |
| Maximum temperature of liquid to evacuate | 35°C | |
| Protection class | F | |
| Degree of protection | IP 68 | |
| Weight | 19 kg | |
Product information
Datasheets(X)
Last viewed
Wire cable 7 x 19 A4 stainless steel
Rivet nut with a small countersunk head and knurled shank
1/2-inch T-handle
Permanent deep-hole marker with cap
1-inch impact socket wrench insert hexagon, metric, short
Snap-off blade
1/4 inch socket wrench insert, metric short
Clamping nut
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Chipping hammer MH 10-SE
