Professional paint Plus
Internal professional paint Plus
PNT-INTERIOR-PLUS-WHITE-24KG
Register now and access more than 125,000 products
Paint for professional use on construction jobs and for walls, ceilings etc.
- Excellent whiteness.
- Good coverage.
- Silky finish.
- Easy to apply.
- Good output.
These data are only recommendations based on our experience. Testing prior to use is recommended. For more information, see the product data sheet.
Datasheets(X)
All surfaces to be coated must be clean, dry and sanded. Old surfaces should be checked for adhesion before applying paint. Remove any surfaces that are not in perfect condition.
Apply a first coat diluted 5 % to 10 % with water. For second coats, dilute 5 % with water.
On highly absorbent surfaces, we recommend two coats of paint diluted with up to 10 % water and a third diluted with up to 5 % water, or one coat diluted with up to 10 % water and a second undiluted coat. Can be applied with brush, roller or spray gun.
Clean tools with water.
Consumption
Approximately 5 to 8 m² per kg and coat, depending on the substrate to be coated.
Storage
Keep for 12 months in its original sealed container, stored in a dry place. Protect from frost and excessive heat.
Colour | White |
Contents | 15 l |
Weight of content | 24 kg |
Chemical basis | Polymer |
Drying time | 2 h |
Max. processing temperature | 30 °C |
Min. processing temperature | 5 °C |
Conditions to maintain shelf life from production | at 10°C to 30°C |
Shelf life from production | 12 Month |
| Technical data | |
| Specific weight | 1.64 g/cm³ |
| Thinner | Water |
| Brookfield LTV, 20°C SP-4 | |
| 1.5 rpm | 80,000 cP |
| 6 rpm | 30,000 cP |
| 12 rpm | 19,000 cP |
| Coefficients p 6/1.5 | 0,37 |
| Coefficients p 12/1.5 | 0,24 |
| Stability at 60°C for 7 days | |
| 1.5 rpm | 90,000 cP |
| 6 rpm | 35,000 cP |
| 12 rpm | 22,000 cP |
| Viscosity variation 12 rpm | 15.80 % |
| Washability tester without pvc (after 7 days of drying) | 100 double passes |
| Drying: first coat | 2 hours |
| Repainting | 12 hours |
| Theoretical output | 8 m²/kg |
| Application temperature | Between + 5°C and + 30°C |
| Solids content by weight | 67 % |
| Max. VOC content | 27 g/L |
| EU limit value of product (cat. A/A) 30 g/L (2010) | |
Last viewed
Sanding belts, zirconia alumina for stationary contact grinding machines
Counter nut, brass Metric according to EN 60423
Time-Sert® drill bit
Safety cable
EPDM sealing ring
Rectangular plug GPN 270 R Polyethylene (PE-LLD), black
Upholstery clip
Nylon Sanding Fleece Roller
Single spare car bulb box H1 14 pieces
TIPP® A4 stainless steel pipe clamp 2 pieces