For detailed information, other images and documents, please select individual articles from the following table.
Clear aqueous-finished varnish
Clear water-based varnish for finishing furniture and interior wood.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Easy application.
A single-component product that does not require mixtures prior to use. There are no product catalyses or losses.
Product compliant with the VOC standard (Royal Decree 117/2003 on Limitation Of Emissions Of Volatile Organic Compounds effective from 2007)
It can be used both on site and in industrial facilities
Highly elastic
It adapts to the movements of the wood.
Excellent features
- Excellent coverage.
- Excellent adhesion.
- Good hardness.
- Good chemical resistance.
- Good scratch resistance.
- Good levelling in vertical applications.
- Non-flammable.
- Practically odourless
Product NOT SUITABLE for varnishing floors.
To apply the product, both this and the surface to be varnished must be above 10°C. It is advisable to temper the product at 20ºC.
Do not apply on woods containing more than 12 % moisture.
The temperature of the place where the product is to be applied must be greater than 12ºC and the relative humidity of the air less than 70 %.
Containers should not be placed directly on the ground during storage.
Drying time refers to air circulation and relative humidity conditions that favour the gradual evaporation of water.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Apply on clean, dry surfaces free of grease, waxes, oils or any other product that may prevent proper adhesion.
Shake the product until perfect homogeneity is achieved.
Pre-anchor with ACUE TRANSPARENT PRIMER.
Before use, gently sand the base onto which it will be applied.
The product is supplied at application viscosity, but add water if it needs to be diluted. Dilution: 5 %-10 %.
Product specially designed to be used with a gun (aerographic, low pressure, Airless, Airmix) but is perfectly applicable with a brush or roller.
Cleaning can be done with water. If varnish has dried, use cleaning solvent.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!