For detailed information, other images and documents, please select individual articles from the following table.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
- Fabric composed of a plastic film, a 3 mm thick dry air bubble, a 9 μ aluminium foil and a 5 mm thick polyethylene foam.
- High thermal and acoustic insulation of floors at home, preventing energy loss.
- Light, clean, easy to apply and reduced thickness (8 mm).
- Suitable for most surfaces.
- Does not rot, unalterable by insects, rodents or chemicals. Hypoallergenic.
- Impervious to moisture, creating an excellent condensation barrier.
- European Technical Evaluation ETE 17/0519.
- EPD (Environmental Product Declaration) certified, in accordance with ISO 14025 and EN 15804:2012+A2:2019.
On floors between houses.
On floors in contact with non-habitable spaces, garages, porches etc.
On floors in contact with the ground.
Inverted roofs.
Flat surfaces.
Heated floors, always under the insulation plate installed in underfloor heating systems. It cannot be in direct contact with the heat source.
Must be placed with the polyethylene foam facing up.
Between the floor slab and the floor or compression layer (minimum 30-40 mm).
Seal the joints using adhesive tape.
Heated floors, where not in direct contact with the radiant source.
It is advisable to level the substrate.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!