For detailed information, other images and documents, please select individual articles from the following table.
Disinfectant WÜRTH SALOR PLUS
Multi-purpose, broad-spectrum disinfectant cleaner for surfaces and equipment
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Features
- Highly concentrated product of moderate alkalinity.
- Formulated with microbicide products with a wide range of actions.
- Effective against viruses, bacteria and fungi.
- Ministry of Health pesticide registration no.: 20-20/40/90-10562 and 20-20/40/90-10562-HA
- Biodegradable product, compliant with EC Regulation No. 648/2004 on detergents.
- For use by professionals.
- Incompatible with anionic detergents.
Advantages
- Product suitable for use in the food industry and for environmental use.
- Multipurpose product formulated as a detergent (degreasing effect) and disinfectant (eliminates viruses, bacteria and fungi).
- Product free from chlorine and corrosive, oxidising or irritating components.
Benefits
- Lets you clean and disinfect at the same time using one product.
- Very easy and safe to use.
- Leaves no unpleasant odours.
- Eliminates the source of all kinds of bad odours, such as waste containers and poorly ventilated areas.
Pre-test an inconspicuous area to verify that the product is compatible with the materials.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated. Use biocides safely. Always read the biocide label and information before use.
Floors in domestic environments, hotels, schools, workshops etc.
Surfaces of all kinds in saunas, gyms, changing rooms and public bathrooms of all kinds.
Food industry.
Interiors of transportation vehicles.
Interiors and exteriors of all types of vehicles.
Bactericidal application: dilute in water at 4 %.
Fungicide and viricidal application: dilute in water at 5 %.
We recommend increasing the dose to 8 % on heavily soiled surfaces.
The product can be applied using a mop, clean damp cloth, spraying and microspraying equipment, rotating floor-cleaning machines, pressure washers (hydrocleaning) etc.
Leave the product to work for a few minutes.
Remove excess product with a dry or damp cloth if necessary (allowing the product to dry naturally increases contact time and disinfectant effectiveness).
When cleaning kitchens, we recommend pre-cleaning using a compatible degreaser (non-ionic).
We recommend using reverse osmosis filtered or distilled water to avoid leaving traces of salt in the water.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
