For detailed information, other images and documents, please select individual articles from the following table.
Multi-perforation sandpaper disc PRO-AIR
With perforation and ceramic grain for improved performance together with the PRO-AIR plate and interface.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
- 150 mm diameter, with 48 holes for optimal extraction of sanding dust, therefore preventing premature clogging when working with the PRO-AIR system of plates and interfaces.
- High performance, thus reducing repair times and material costs.
- Ceramic grain with aluminium oxide and zirconium particles.
- PRO-AIR FINE aluminium oxide grain, from P2000 to P5000.
- Stearate coating to prevent the sandpaper becoming clogged.
- Polyester and nylon backing.
- With hook-and-loop fastening.
- Resin binder.
- It is recommended that no more than three grains be skipped in the repair process in order to achieve a better finish.
- For sanding fillers, primers, paints, wood, varnishes, fibres, wood etc.
- Depending on some colours, such as silver and light pearls, there are some paint marks where it is advisable to finish the repainting process with P600 and P800 grains.
- Finer grains such as P1500, P2000 and PRO-AIR FINE are suitable for pre-polishing work.
PRO-AIR system (sandpaper disc and plate)
The PRO-AIR system (1) features the same perforation on the sandpaper discs and on the plate, for improved performance and to prevent premature clogging. The hole furthest away the centre of the sandpaper disc acts as a guide for aligning both parts, achieving maximum performance up to 30 % more than a conventional sandpaper disc.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!