Reinforcement mesh GEOLASH
For detailed information, other images and documents, please select individual articles from the following table.
Reinforcement mesh GEOLASH
Polyester reinforcement mesh for awkward areas
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Punched and heat-welded geotextile for reinforcement in awkward areas.
- Ideal for angles, active cracks, isolation joints, half-rounds, edges and edge protection etc.
- Reinforcement of waterproofing membranes.
- For irregular surfaces, Geolash is impregnated between layers of PU membrane.
- 100 % solvent-compatible.
Instructions
Trim the required amount of Geolash for the area to be treated and place on the first layer of fresh PU membrane.
Ensure good adhesion using a non-impregnated roller.
Then apply a second coat of PU membrane after the first coat has dried. Check that the Geolash is fully adhered.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!