For detailed information, other images and documents, please select individual articles from the following table.
Bright PU protector EVO
Glossy aliphatic polyurethane varnish for protecting pavements and waterproofing.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
A 1-component product that dries by ambient humidity.
Forms a hard, strong, continuous, elastic film with excellent mechanical properties.
Excellent adhesion on a wide variety of substrates.
Provides a coating that is resistant to weather, extreme temperatures, UV rays and chemicals.
100 % aliphatic.
Does not yellow, change hue or crack. Ideal as a finishing coat on the Sealproof EVO system.
Clear lacquer tinted in colours.
Ready to use. Pigmented in colours to make preparation as easy as possible for the operator.
Highly elastic.
High resistance to abrasion, strain and breakage.
Excellent resistance to weather and extreme temperatures.
Cures even at low temperatures with ambient humidity.
Do not apply in thick layers.
Do not apply the product for waterproofing swimming pools in contact with chemically treated water.
Once the container has been opened, we recommend using it in its entirety.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Finish for the protection of the Sealproof EVO system (increases resistance to abrasion and UV rays).
Protection of concrete and synthetic coatings.
Surfaces should be smooth, clean, dry, free from residual moisture and as solid as possible. The product comes pigmented according to the desired finish. Applied as sealant for SEALPROOF EVO (art. no. 0892 300 0), it is applied directly after being mixed at low speed. Do not wait longer than 72 hours after applying SEALPROOF EVO (art. no. 0892 300 0) and apply two coats of the product. Do not leave longer than 48 hours between coats. Apply very thin coats.
Amounts used
As a guideline, the approximate amount used for sealing concrete, depending on the porosity of the substrate, is 0.2-0.5 kg/m2. Sealing Sealproof EVO uses 0.100-0.150 kg/m2.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!