For detailed information, other images and documents, please select individual articles from the following table.
Plus spray primer
1-component, insulating undercoat with excellent filling capacity and excellent adhesion
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Fast-drying
- Very useful for quick repairs and small touch-ups.
- Can be sanded after 40 min. at 20°C depending on the thickness applied.
Excellent filling capacity
Enables the application of multiple coats without peeling.
Fine spray
Facilitates sanding.
Suitable for all automotive and commercial vehicle surfaces
• Excellent adhesion to fillers, electro-zinc plating (galvanised or aluminium), primers, spray gun primers, fibreglass and old paint.
Can be painted over with water-based and solvent-based paints
Suitable for all paints used on automotive and commercial vehicles
Comes with two different fan nozzle types
Option to choose according to work and surface to be treated.
Meets VOC regulations per 2004/42 Cat. II B (c) 780 g/L max. VOCs: 633 g/L
Compliant with current environmental regulations.
Do not apply directly to plastics.
Do not apply too thickly to avoid dimpling, bubbling, colour changes etc.
Shake for 2 to 3 minutes before use. Surfaces must be sanded, dry and free from grease and dust. Apply at a distance of 20 cm depending on thickness, in several coats, respecting the evaporation time between coats. Clean nozzle by spraying upside down until only gas comes out.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!