For detailed information, other images and documents, please select individual articles from the following table.
Exterior/interior plastic paint White
For exterior and interior use. Excellent whiteness and coverage
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Excellent whiteness.
- Its rutile titanium dioxide pigments provide excellent whiteness.
- Excellent coverage and performance.
- Saves time and money.
- Can paint a greater surface area with excellent coverage.
Excellent wash and scrub resistance.
Its high wet-wipe resistance allows it to be cleaned with a damp cloth several times.
Excellent features.
- White finish and smooth texture.
- Very good opacity when dry.
- Good adhesion to work surfaces.
- Good surface penetration.
- Does not yellow.
- Ideal for painting stucco surfaces and textures with a silky matte finish.
- Can be applied to plaster, cements and derivatives, façades, walls, ceilings etc.
Do not apply at temperatures below 5°C.
Do not wash walls until 30 days have elapsed.
Do not use on surfaces that are wet (dewy) or if there is a chance of rain
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Stir until completely mixed.
Use on clean surfaces, free of dust, dirt and grease.
Can be used with brush, roller or gun.
Solvent: clean water.
Primer: Use the same paint thinned with water according to the table.
Can be stained using water dyes (art. no. 0828 900 6..) or universal dyes with a maximum concentration of 5 %.
Clean tools with water
General recommendations
• Surface preparation
- Surfaces must be clean and free of dust, dirt, grease, mould or other products that may impair adhesion.
- Properly prepare any surfaces with poor adhesive properties and surfaces that are chipped or dirty.
- Wait until newly applied surfaces have set before painting.
• On painted surfaces
- Completely remove any poorly adhered paints.
- Remove dust and dirt before repainting.
- Bright surfaces should be sanded, opening the pores to facilitate adhesion.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!