Arrow-shaped drill bit for drilling through porcelain
For detailed information, other images and documents, please select individual articles from the following table.
Arrow-shaped drill bit for drilling through porcelain
High speed drill bit for work on porcelain.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Minimal cooling.
- Wet the drill bit every (approx.) 5 seconds of operation.
- Four cutting faces.
- Its sharp tip means that it does not slip on the material to be drilled.
- If it becomes too worn down for porcelain drilling, it can be used on other softer materials.
- Only in drill mode, NO PERCUSSION DRILLING.
- Use a wooden support when drilling loose parts.
- Depth stop for drilling tile only (not concrete or brick).
Notice
• It is recommended to use the SB 13-XE hammer drill on speed setting 1.
• For an increased service life, the drill bit can be used with a constant flow of water.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!