TILE LEVELLING SYSTEM TWO BREAKING POINTS
For detailed information, other images and documents, please select individual articles from the following table.
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
- Quick and simple system for precise levelling when positioning tiles.
- Suitable for both vertical and horizontal positioning.
- For 1, 1.5, 3 and 5 mm joints.
- Suitable for all kinds of surfaces, including ceramics, stoneware, porcelain, marble, granite and more.
- For workpiece thicknesses between 2 and 18 mm.
- For all types of tile positioning, from stacked to offset.
- Two breaking points for increased substrate stability.
NoticeThe joint must be a minimum of 1.5 mm for the surface to adhere. The levelling mount is not designed for positioning tiles with 1 mm joints.
Application areaOnce the cement glue is applied, position the tile and wedge it using the levelling mounts in the corners, leaving a 5 cm distance from the corner's vertex. Then, continue to position the adjacent tiles, following the same process. Tighten the levelling mount manually by screwing on the nut. After 24 hours, remove the mount and nut assembly by striking it using a mallet, always in the direction of the joint.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!