For detailed information, other images and documents, please select individual articles from the following table.
Adhesive sealant MS-SUPERFLEX
Polymer-based adhesive-sealant for bonding and sealing most materials used in construction.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Features
- MS-polymer sealant and adhesive for bonding and sealing galvanised sheets, ferrous and non-ferrous metals, glass, shower and sink joints, aluminium and wood carpentry, powder-coated aluminium, interior-exterior sealing joints, tiles, concrete, steel, zinc, copper.
- Also for use with thermoplastics (PP, PB, PS, PMMA except polyethylene or PTFE) and thermoset plastics (PET, PVC). Paint enamels, brick, natural or artificial stone and ceramics.
- Good adhesion on wet surfaces.
- Exceptional resistance to premature ageing.
- Excellent UV resistance.
- Thanks to its special formulation, it prevents and delays the formation of mould in showers, screens, washbasins and water sinks.
Advantages
- Can be applied indoors and outdoors.
- Good resistance to chemical agents.
- Low odour. Does not irritate operators or the environment, especially in enclosed areas.
- Does not shrink by ensuring that the beads remain sealed to the walls to perform their sealing function.
- Ideal product for façades, toilets and glazing.
Benefits
- High elasticity that gives it the same properties as silicone, but with a bonding force three times higher.
- Its ability to be applied both indoors and outdoors, and its versatility, make it suitable for use as an all-in-one product.
Tensile strength is a product of the contact surface of the product on the bonding surfaces and not of the total surface of the surfaces.
Due to the large number of paints on the market, test before painting to check their compatibility.
These instructions are merely recommendations based on our experience.
We recommend performing tests for each new type of application or surface to be treated.
How to use:
When used as an adhesive, clean and degrease the surfaces to be joined and open the pore if the surfaces so permit. Slightly moisten surfaces to aid curing. The best time for painting is immediately after the skin forms, approx. 40-50 minutes after application. If used as a sealant, apply a continuous bead avoiding the formation of air pockets. Smooth with water or a chemical smoother art. no. PR01_0893003.
Assembly adhesives cure using moisture. If used as an adhesive rather than a sealant, we recommend following the advice for use in data sheet 03 01 0083.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!