Hot melt edging adhesive for industrial machines
For detailed information, other images and documents, please select individual articles from the following table.
Hot melt edging adhesive for industrial machines
For automatic edge bander with roller application
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
EVA copolymer granules
Universal and transparent
- no marking of seals
Excellent bonding
- Clean application
No stringing
- no fouling of edges when cutting the end
- no fouling of machine parts
High strength
NoticeRecommended travel speed: 10–30 m/min. (depending on the edge width)
Application temperature: +170°C to +200°C
Softening point: approx. +105°C
Application temperature: +170°C to +200°C
Softening point: approx. +105°C
This information is based on our own experience. We recommend conducting a trial in advance. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. We accept no liability for the information and technical advice provided by our customer service, unless the advice or information provided is mentioned in the scope of the contract or the advisor acted deliberately. We guarantee that our products will be of a consistent quality and we reserve the right to make technical changes and other developments.
Application areaFor bonding polyester, melamine, PVC, ABS, solid wood and plywood edges, and non-pressed impregnated paper
InstructionsClean the surface and remove any dust. Ensure that the surface and the edge are at ambient temperature, ideally +18°C. The humidity level of the wood should preferably be between 8% and 10%. Avoid air currents when working.
Regularly check the temperature and adjust if necessary. Adjust the weight so that the adhesive bubbles slightly on the edges.
The glued material can be machined immediately after bonding.
Regularly check the temperature and adjust if necessary. Adjust the weight so that the adhesive bubbles slightly on the edges.
The glued material can be machined immediately after bonding.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!