For detailed information, other images and documents, please select individual articles from the following table.
Temporary safety guardrail post 1,200 mm WEM
Temporary edge protection system, using a guardrail pipe and a base (UNE EN 13374 standard and AENOR 044/000044 certificate)
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Features
- The edge protection system is classified as class A, which allows safe work on flat concrete surfaces or inclined surfaces with a maximum slope of less than 10 %.
- Has supports for easy and quick installation of the upper and middle guard rail and base.
- Class A temporary edge protection system in accordance with the UNE EN 13374 standard.
- Made with high-quality S275 steel, rounded tube 40 mm.
Advantages
- Quick setup on the job using sockets embedded in the slab and anchoring brackets.
- Full-time protection for operators against falls.
Benefits
- EPOXY paint surface finish, suitable for outdoor use.
- Saves installation time.
• The "WH" guardrail has been satisfactorily tested and complies with the UNEEN 13374 standard.
• Included in the AENOR 044/000044 certificate.
Setup conditions and limits
• The distance between the highest part of the main guardrail and the working surface must be at least 1,000 mm.
The gaps between rails must not exceed 470 mm.
• All horizontal gaps must be less than 120 mm.
• The distance between the highest part of the toeboard and the working surface must be at least 150 mm.
• Avoid gaps between the toeboard and the work surface.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!