For detailed information, other images and documents, please select individual articles from the following table.
Nautical gloss restorer
Polish for boat hulls and parts finished in fibreglass.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Features:
- Based on nanotechnology.
- Permeable to water vapour diffusion.
- Water-repellent properties.
- Non-adherent.
- Colourless.
- Resistant to UV rays and alkalis.
- 250 ml sprayer.
Advantages:
- Its components generate nanoparticles that are anchored in the surface to be treated.
- Decreases surface tension, which facilitates the penetration of the product into the pores and places that are most inaccessible in the substrate.
- Quickly removes minor defects (light scratches, oxidation, chalk, water marks).
- Provides a durable protective layer with a high gloss.
- Removes the finest scratches and protects the surface.
- Ensures that the surface does not lose its natural characteristics or its appearance.
- After treatment, the colour of the boat is more intense and more glossy.
- It penetrates and fixes in the micropores of the material due to its nanoparticles, therefore achieving a gloss effect and uniform colouring.
- Strong reduction of water absorption, protection against humidity, rain and soluble salt efflorescences.
Benefits:
- Saves time and easy to apply.
- Mimics the finish of a polish.
Restores the gloss and colour of the gelcoat and antifouling on boats that are coloured by weather effects such as solar radiation. Ideal for marine, RV and industrial gelcoat surfaces.
The product is applied pure as supplied to the well-cleaned, dry substrate by spraying on a lint-free cotton or microfibre rag or cloth. Spread evenly and in the same direction until the entire surface to be treated is covered. Avoid splashing where treatment is not required. Allow to dry and polymerise for at least 15-20 minutes, protected from direct sunlight. Wipe with a dry microfibre cloth, lightly rubbing, to remove excess product. Preferably apply two thin coats rather than a single thick one, as this will create an oily, greasy film. Applying the product on wet surfaces runs the risk of the treatment not remaining uniform.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!