For detailed information, other images and documents, please select individual articles from the following table.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
For indoor and outdoor use
Can be applied to surfaces such as plaster, concrete, cement, wood, polyethylene etc. both indoors and outdoors.
Does not shrink.
Specially formulated so it does not shrink, crack or peel, thanks to its microspheres and excellent adhesion.
Can be painted immediately
Dries quickly so it can be painted on immediately, except with solvent paints.
Easy to sand
Extra easy sanding with minimal effort, achieving an extra white finish. Allows drilling and nailing in repaired areas.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
The surfaces to be treated must be clean, dry and free from grease.
Apply pre-primer (Impromax) on highly absorbent surfaces.
For stucco, dilute with water and remove it until a uniform, moist paste is achieved.
Apply with a trowel or spatula.
Clean the tools with water after you have finished working and seal the product tightly.
Do not apply the product on surfaces subject to permanent moisture.
Do not apply the product at temperatures below 5°C.
This product is exempt from safety labelling
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!