For detailed information, other images and documents, please select individual articles from the following table.
VAKU MULTI filler
2C universal filler for a broad range of applications.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
- Can be used as coarse or fine filler
- Outstanding adhesion on a wide variety of substrates, in particular on galvanic sheet steel, hot-dip galvanised bodywork panels, sheet steel, aluminium, wood, polyester-based GFRP parts
- Good application even on vertical surfaces
- Slight post-hardening
- Easy to sand
The ambient and material temperature for application should be between +18°C and +25°C. Do not apply below +5°C.
Vehicle repairs and industry.
Carefully clean the substrate of rust, dirt, grease and old, loose paint remnants and then sand. Mix the required amount of filler thoroughly with approx. 2% of hardener paste and then apply within 4 to 6 minutes. Reason for reaction: Wash primers and other acid-hardening surfaces are not suitable substrates.
An excessive amount of hardener paste reduces the pot life but does not accelerate hardening; under unfavourable conditions, this can even cause adhesion problems and/or discolouration on subsequently applied paintwork.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!