For detailed information, other images and documents, please select individual articles from the following table.
Elastic coating RECULASTIC®
Elastic coating for waterproofing
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
- Waterproof and breathable
- Excellent bonding
- Resistant to ageing
- Excellent flexibility even at extreme temperatures (0°C to +80°C)
- Fungus resistant and non-toxic
The product cannot be applied to damp surfaces or subject to settling. In applications with an Airless gun, a greater dilution is recommended and the thickness per layer will be lower. A minimum of 3 layers is recommended in this situation. The product should not be applied on high-traffic surfaces or in places where there is high abrasion.
Estimated consumption (depends on the type and state of support)
- 1.5 to 2 kg/m² (terraces and roofs)
- 0.6 to 0.8 kg/m² (façades)
This information is intended to provide the best practice advice possible, based on our knowledge and experience. However, we are unable to provide a comprehensive list of all potential outcomes, due to the numerous applications of the product and storage and application conditions that are beyond our control. This is also true for queries made to our customer service department. We recommend that you always carry out your own tests. We guarantee the continued quality of our products. We reserve the right to make technical alterations and improvements to the product.
- Exterior, horizontal and vertical surfaces
- Roofs and terraces
- Fibre-cement tiles
- Small surfaces such as cracks, joints and rails
- Plaster and concrete surfaces
The surface must be properly dry, free from dust, grease, oil or any other material that could affect its normal application and adhesion. For surfaces with mould and moss, these organisms must be eliminated. The product must be shaken slowly until it becomes homogeneous. When waterproofing terraces, apply a first coat, let dry and cover with fibreglass mesh. Afterwards, apply a second coat to properly cover the mesh. When waterproofing façades, the first coat can be diluted with a maximum of 5 % of water. After drying, apply the second coat of the product as is. As product protection, it is always advisable to apply Reculastic® Top, Art. 0893 199 61, which will protect the surface, reduce residual stickiness and give the coating greater strength. In order to prolong the life of the waterproofing, it is recommended to apply a layer of Reculastic® Top periodically every five years as maintenance.
Instructions to follow
It is advisable to cover Reculastic® either with cement adhesive and pavement, Reculastic® Top or with a screed. On hard and low-porous building materials, a treatment to open the pore must be carried out before application. After scouring, the surface must be washed well with water, allowed to dry and a primer must be applied.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!